Modular construction can also be referred to as systems-built construction. The same approach to construction can also be referred to as pre-fab construction. There is a common confusion among people that all the three terms refer to different type of construction. That is not true because in all the three approaches to construction, the home is constructed off-site before it is trucked to the location of installation. Here are facts regarding Louisa modular homes.
To begin with, a permanent foundation is made in advance at the construction site. A modular home is then delivered to the site and installed on the premade foundation. The home then becomes permanent on the site and cannot be moved once it has been installed on the foundation. Since such homes are constructed offsite, most people tend to think that they are not as good as homes constructed onsite.
In previous years, the concern about modular homes being weaker may have be true but currently things have changed. Modern modular homes are built with high skills and technology, which make them very strong and durable. In other cases, pre fab homes may be stronger and more durable as compared to houses built onsite. An average modular home contains three to seven modules but the modules can be as many as possible.
A total footage of 3000 square feet or more is what a typical home can be. Improved technology has rendered it feasible to design a home of any size and shape that one prefers. Oval, rectangle, circle, and square are shapes that individual modules may be constructed into. In some cases, it is possible to have one module incorporating more than one shape.
The modules are always transported to the installation site before they are completed. They are usually seventy to ninety percent complete at the time of trucking. The remaining work is normally done at the site after installation. Such works comprise of final touches and takes little time to be completed. Mostly they are done after installation of the modules to the foundation.
The transportation of the modules is done using large trucks, which move on the road system. Once the module gets to the site, it is unloaded using a crane. The crane is then used to lift the module and place it onto the foundation. The module is completely secured onto the foundation and the crew performs the final touches.
Final touches may include task such as tying in the siding, interior finish, and the roof section. The work of the company that built the home ends at that point. Beyond that, one may hire a private builder and have them complete additional features such as decks, garages, and porches. One may also decide to complete these features instead of hiring a builder if they have the skills needed.
Reports from FEMA show that modular houses have a high resistance to hurricanes as compared to conventional ones. This makes modular homes acceptable in the United State by local, state and the federal governments. For this to be effective, strict standards are set that manufacturers must always comply with during the entire process of constructing modular homes.
To begin with, a permanent foundation is made in advance at the construction site. A modular home is then delivered to the site and installed on the premade foundation. The home then becomes permanent on the site and cannot be moved once it has been installed on the foundation. Since such homes are constructed offsite, most people tend to think that they are not as good as homes constructed onsite.
In previous years, the concern about modular homes being weaker may have be true but currently things have changed. Modern modular homes are built with high skills and technology, which make them very strong and durable. In other cases, pre fab homes may be stronger and more durable as compared to houses built onsite. An average modular home contains three to seven modules but the modules can be as many as possible.
A total footage of 3000 square feet or more is what a typical home can be. Improved technology has rendered it feasible to design a home of any size and shape that one prefers. Oval, rectangle, circle, and square are shapes that individual modules may be constructed into. In some cases, it is possible to have one module incorporating more than one shape.
The modules are always transported to the installation site before they are completed. They are usually seventy to ninety percent complete at the time of trucking. The remaining work is normally done at the site after installation. Such works comprise of final touches and takes little time to be completed. Mostly they are done after installation of the modules to the foundation.
The transportation of the modules is done using large trucks, which move on the road system. Once the module gets to the site, it is unloaded using a crane. The crane is then used to lift the module and place it onto the foundation. The module is completely secured onto the foundation and the crew performs the final touches.
Final touches may include task such as tying in the siding, interior finish, and the roof section. The work of the company that built the home ends at that point. Beyond that, one may hire a private builder and have them complete additional features such as decks, garages, and porches. One may also decide to complete these features instead of hiring a builder if they have the skills needed.
Reports from FEMA show that modular houses have a high resistance to hurricanes as compared to conventional ones. This makes modular homes acceptable in the United State by local, state and the federal governments. For this to be effective, strict standards are set that manufacturers must always comply with during the entire process of constructing modular homes.
About the Author:
Get an overview of the things to keep in mind when choosing a builder of Louisa modular homes and more information about a reliable builder at http://www.haleyshomesinc.com/Options_page.html today.
No comments:
Post a Comment